24000 Series

24000 Series

24000 Series

Spherical roller bearings have two rows of rollers, a common spherical outer ring raceway and two inner ring raceways inclined at an angle to the bearing axis. The center point of the sphere in the outer ring raceway is located on the bearing axis. Therefore, these bearings are self-aligning and insensitive to misalignment of the shaft with respect to the housing, which may be caused by, for example, shaft deflection. Spherical roller bearings are designed to withstand large radial loads and large axial loads in both directions.


Symmetrical Roll

The symmetrical rollers are self-adjusting to provide optimal load distribution along the length of the rollers. This can maintain low stress under all load conditions and extend the life of the bearing.


Roller tolerance

The rollers in spherical roller bearings are made extremely compact in size and have certain shape tolerances. Each roller is actually the same in size and shape as the other rollers in the group. This optimizes the load distribution on the rollers, thereby maximizing the life of the bearing.


Special roller profile

The roller profile determines the stress distribution in the roller/raceway contact area. The special profile makes the load more evenly distributed along the rollers and prevents stress peaks at the ends of the rollers, thus prolonging the life of the bearing.


Self-guide roller and floating guide ring between two rows of rollers

The self-guide roller reduces friction and frictional heat. The floating guide ring guides the unloaded rollers so that they enter the loading area in the best position.



selectInquiryBearing No.Dimensions (mm)Basic Load Rating (KN)Speed Limit (rpm)Weight
dDBrs minCrCorGreaseOil(kg)
24024 120 180 60 2 390 670 1500 2300 5.48
24024K30 120 180 60 2 390 670 1500 2300 5.39
24024K30W33C3 120 180 60 2 390 670 1500 2300 5.39
24024W33C3 120 180 60 2 390 670 1500 2300 5.48
24026 130 200 69 2 505 895 1300 2100 8.08
24026K30 130 200 69 2 505 895 1300 2100 7.95
24026K30W33C3 130 200 69 2 505 895 1300 2100 7.95
24026W33C3 130 200 69 2 505 895 1300 2100 8.08
24028 140 210 69 2 510 945 1200 1900 8.57
24028K30 140 210 69 2 510 945 1200 1900 8.43
24028K30W33C3 140 210 69 2 510 945 1200 1900 8.43
24028W33C3 140 210 69 2 510 945 1200 1900 8.57
24030 150 225 75 2.1 585 1060 1200 1800 10.7
24030K30 150 225 75 2.1 585 1060 1200 1800 10.5
24030K30W33C3 150 225 75 2.1 585 1060 1200 1800 10.5
24030W33C3 150 225 75 2.1 585 1060 1200 1800 10.7
24032 160 240 80 2.1 650 1200 1100 1700 13
24032K30 160 240 80 2.1 650 1200 1100 1700 12.8
24032K30W33C3 160 240 80 2.1 650 1200 1100 1700 12.8
24032W33C3 160 240 80 2.1 650 1200 1100 1700 13
24034 170 260 90 2.1 800 1470 1000 1600 17.7
24034K30 170 260 90 2.1 800 1470 1000 1600 17.4
24034K30W33C3 170 260 90 2.1 800 1470 1000 1600 17.4
24034W33C3 170 260 90 2.1 800 1470 1000 1600 17.7
24036 180 280 100 2.1 965 1770 950 1500 23.3
24036K30 180 280 100 2.1 965 1770 950 1500 22.9
24036K30W33C3 180 280 100 2.1 965 1770 950 1500 22.9
24036W33C3 180 280 100 2.1 965 1770 950 1500 23.3
24038 190 290 100 2.1 995 1850 900 1400 24.3
24038K30 190 290 100 2.1 995 1850 900 1400 23.9
Previous12Next